|
|
TM 9-2320-386-24-1-2
0335 00
TRANSMISSION (IN-VEHICLE) REPLACEMENT (Contd)
REMOVAL
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
Always wear eye protection when draining air reservoirs. Failure
to do so may result in injury to personnel.
CAUTION
Cap or plug all hoses, connections, and openings immediately
after disconnection or component removal to prevent
contamination. Failure to do so may result in damage to
equipment.
1.
Remove eight screws (4) and propeller shaft (5) from input flange (7) on transfer case (6) and output
flange (1) on transmission (8).
2.
Remove screw (3), washer (2), and output flange (1) from transmission (8).
NOTE
Assistant will help with steps 3 through 7.
3.
Remove eight locknuts (11), screws (13), and front propeller shaft (10) from flanges (9) of transfer
case (7) and front axle differential (12). Discard locknuts (11).
2
3
1
4
9
5
10
13
12
11
8
7
6
0335 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |