 |
|||
|
|
|||
|
Page Title:
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0302 00
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd)
22.
Install new gasket (15) and intake manifold (16) on cylinder head (6) with washer (14), screw (13),
five washers (12), screws (11), fifteen washers (17), and screws (18). Tighten screws (11), (13),
and (18) 13-23 lb-ft (18-31 Nm) in sequence shown.
23.
Install clevis (24) on link pin (23) with retainer pin (22) and new retaining ring (19).
24.
Slide sleeve (21) from cylinder head (6) and seat in governor (25). Install clip (20) on sleeve (21).
NOTE
Perform fuel synchronization (WP 0321 00) and adjustments
25.
Install new gasket (10) and valve cover (9) on air intake manifold (16) with fourteen washers (8)
and screws (7). Tighten screws (7) 45-99 lb-in. (5-11 Nm) in sequence shown.
7
9
8
1
13
9
5
3
7
11
10
12
8
4
6
10
14
2
13
18
VALVE COVER
11
12
TORQUE SEQUENCE
17
14
15
20
16
6
19
6
21
25
22
17
13
8
1
5
10
15
21
19
23
24
18
12
7
2
6
16
14
9
4
3
11
20
INTAKE MANIFOLD
TORQUE SEQUENCE
0302 00-23
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version