CYLINDER HEAD (IN-VEHICLE) MAINTENANCE - continued

TM 9-2320-386-24-1-2

0302 00

CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd)

NOTE

Crankshaft pulley is located behind vibration damper.

25.

Using breaker bar, rotate belt tensioner (5) counterclockwise to relieve belt tension, remove fan

drivebelt (3) from alternator pulley (7), crankshaft pulley (4), and fan pulley (2), and release belt

tensioner (5).

26.

Remove screw (9) and lockwasher (8) from bracket (10) and alternator (11). Discard lockwasher (8).

27.

Loosen two screws (6) and rotate alternator (11) away from engine (1).

28.

Disconnect air compressor coolant line (20) from fitting (23).

Remove screw (21), washer (22), and clamp (19) with air compressor coolant line (20) from fan

29.

bracket (18).

30.

Disconnect air compressor coolant line (16) from elbow (24) on water regulator housing (12).

31.

Remove throttle return spring (25) from brackets (15) and (26).

32.

Remove screw (13), washer (14), clamp (17) with air compressor coolant line (16), and bracket (15)

from engine (1).

0302 00-8