 |
|||
|
|
|||
|
Page Title:
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0302 00
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd)
16.
Remove two nuts (21), screws (23), and washers (22) from radiator (27), and install ends of chain on
radiator (27) with two washers (22), screws (23), and nuts (21).
17.
Install lifting device at center point of chain and take up slack.
18.
Remove four locknuts (29), screws (24), and washers (25) from pivot mount (26) and
crossmember (28). Discard locknuts (29).
19.
Remove locknut (20), washer (19), bushing (18), screw (14), washer (15), and bushing (16) from
bracket (17) and bracket (13). Discard locknut (20) and bushings (18) and (16).
20.
Disconnect oil line (30) from fitting (31) on radiator (27).
.WARNING.
All personnel must stand clear during lifting operations. A snapped
chain, or shifting or swinging load may cause injury to personnel.
CAUTION
When removing radiator, avoid contact with the fan actuator hub.
Contact between the radiator and fan actuator hub may cause
damage to the radiator.
21.
Lift radiator (27) from vehicle and lower onto pivot mount (26).
22.
Tilt and lower radiator (27) to ground.
23.
Remove two nuts (21), screws (23), washers (22), and chain from radiator (27).
24.
Install two screws (23), washers (22), and nuts (21) on radiator (27) to avoid loss.
LIFTING
DEVICE
21
CHAIN
22
21
31
23
22
20
~
17 16 15
19
18
24
14
27
13
25
26
30
28
29
0302 00-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version