 |
|||
|
|
|||
|
Page Title:
TIRE AND WHEEL REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0174 00
TIRE AND WHEEL REPLACEMENT (Contd)
INSTALLATION
1.
Apply sealant to male threads of adapter (11) and hollow stud (7).
CAUTION
Do not slide wheel over threaded hollow stud or damage to
equipment may result.
NOTE
Assistant will help with step 2.
When installing wheel, ensure it is positioned in previously
marked position.
2.
Install wheel (8) on hub (6) with six nuts (9). Alternately tighten nuts (9).
3.
Raise vehicle from jack stand (TM 9-2320-386-10) and lower to ground.
Tighten nut (9) on hollow stud 275-300 lb-ft (373-407 Nm) and nuts (9) on solid studs 390-420 lb-ft
4.
(529-569 Nm).
5.
Install elbow (10) on hollow stud (7).
6.
Install adapter (11) on elbow (10).
7.
Install air tube (12) on adapter (11).
8.
Inflate tire to proper pressure (TM 9-2320-386-10).
9.
Install stone shield (3) on two studs (4) with nuts (2). Tighten nuts (2) 60-80 lb-ft (81-108 Nm).
10.
Install stone shield (3) on flange (5) with two new lockwashers (13) and screws (1). Tighten
screws (1) 81-104 lb-ft (110-141 Nm).
11.
Start engine (TM 9-2320-386-10) and allow air pressure to build. Check for air leaks.
4
5
3
7
6
2
1
13
8
12
11
9
10
END OF WORK PACKAGE
0174 00-3/4 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version