 |
|||
|
|
|||
|
Page Title:
TIRE AND WHEEL REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0174 00
TIRE AND WHEEL REPLACEMENT (Contd)
REMOVAL
WARNING
Air system components are subject to high pressure. Always
relieve pressure before loosening or removing air system
components.
Eyeshields must be worn when releasing compressed air. Failure
to do so may result in injury to personnel.
CAUTION
When disconnecting air lines and hoses, plug all openings to prevent
dirt from entering and causing damage to internal parts. Remove all
plugs prior to installation.
NOTE
Front and rear wheels are replaced the same. This procedure is for
the front wheel.
1.
Remove two screws (1) and lockwashers (13) from stone shield (3) and flange (5). Discard lockwashers (13).
2.
Remove two nuts (2) and stone shield (3) from studs (4).
3.
Remove air tube (12) from adapter (11).
4.
Remove adapter (11) from elbow (10).
NOTE
Mark hollow stud-to-wheel position for installation.
5.
Remove elbow (10) from hollow stud (7).
6.
Loosen six nuts (9).
7.
Raise vehicle (TM 9-2320-386-10).
8.
Place jack stand under axle of vehicle and lower vehicle onto jack stand.
NOTE
Assistant will help with step 9.
9.
Remove six nuts (9) and wheel (8) from hub (6).
0174 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version