 |
|||
|
|
|||
|
Page Title:
Table 2. STE/ICE-R NO-GO-Chain Tests - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0017 00
Table 2. STE/ICE-R NO-GO-Chain Tests (Contd)
NOTE
Test G01, VTM Connections and Checkout, must be
performed before running any other STE/ICE-R test.
DCA
GOVERNOR/POWER TEST FAULT ISOLATION
NG90
MODE
NOTE
If vehicle has failed Power Test,
start with step 1. If vehicle has failed
governor checks, start with step 2 on
next page.
CAUTION
Check that air inlet is clear of tools,
debris, dirt, and dust before performing
following test.
REMOVE AIR CLEANER REPEAT POWER TEST:
1
Remove air cleaner element from air intake
housing (WP 0040 00).
Repeat Power Test, G06, step 2.
Does engine pass power test with air cleaner out?
NO
YES
Install new air cleaner element (WP 0040 00).
Reinstall air cleaner element (WP 0040 00).
NOTE
After completing repair, rerun the GO-Chain
Check for clogged fuel filter.
tests to verify that the problem is fixed and
Check for high fuel return pressure.
that no other problems exist.
Check for adequate turbocharger outlet
pressure.
Check for kinked fuel lines.
Repair as necessary.
Proceed to step 2.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version