 |
|||
|
|
|||
|
Page Title:
Table 2. STE/ICE-R NO-GO-Chain Tests - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0017 00
Table 2. STE/ICE-R NO-GO-Chain Tests (Contd)
ENGINE CRANK NO START
DCA
NG30
(Contd)
MODE
CHECK FUEL SUPPLY PRESSURE:
3
Dial 24 into TEST SELECT.
Press and hold TEST until CAL message
PROMPTING
appears on display.
MESSAGE
Release TEST.
TEST NO.
TEST
Wait for offset value to appear on the display.
24
FUEL SUPPLY
Is the offset value within 45 psi (310 kPa)?
PRESSURE
YES
NO
Proceed to TM 9-4910-571-12&P
for offset fault isolation.
CHECK FUEL SUPPLY PRESSURE DURING CRANK
4
(UPSTREAM OF FUEL FILTER):
Turn vehicle accessory switch ON.
Dial 24 into TEST SELECT and press TEST.
Crank the engine and watch the readout display.
The number on the display should be above 7 psi
(48 kPa).
Is the fuel pressure above the limit specified?
YES
NO
Refer to Mechanical Troubleshooting (WP 0009 00)
to check for defective transfer pump.
Proceed to step 5.
NOTE
5
After completing repair, rerun GO-Chain tests to
verify that the problem is fixed and that no other
problems exist.
0017 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version