 |
|||
|
|
|||
|
Page Title:
PRIMARY HEATER AUXILIARY DUCT REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
FOR SPECIAL PURPOSE KITS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
PRIMARY HEATER AUXILIARY DUCT REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
M109A3, M185A3
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Battery ground cable disconnected
(WP 0126 00).
NOTE
Auxiliary duct is normally located on van front wall prior to
secondary heater installation.
REMOVAL
1.
Unbuckle three straps (2) and remove auxiliary duct (1) from van ceiling (4).
2.
Remove three screws (3) and straps (2) from van ceiling (4).
INSTALLATION
1.
Install three straps (2) on van ceiling (4) with three screws (3).
2.
Install auxiliary duct (1) on van ceiling (4) with three straps (2).
3.
Connect battery ground cable (WP 0126 00).
4.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
3
1
2
4
3
2
END OF WORK PACKAGE
0382 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version