 |
|||
|
|
|||
|
Page Title:
PRIMARY HEATER FUEL FILTER REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
FOR SPECIAL PURPOSE KITS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
PRIMARY HEATER FUEL FILTER REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
M109A3, M185A3
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Materials/Parts
Battery ground cable disconnected
(WP 0126 00).
Antiseize tape (item 42, WP 0468 00)
REMOVAL
WARNING
Diesel fuel is flammable. Do not perform fuel system
procedures near open flames. Injury or death to personnel may
result.
1.
Remove fuel line (8) from elbow (7) and fuel tube (2) from elbow (3).
2.
Remove elbows (3) and (7) from filter (6).
3.
Remove two screws (5), washers (4), and filter (6) from van body (1).
INSTALLATION
NOTE
Wrap male pipe threads with antiseize tape prior to
installation.
1.
Install filter (6) on van body (1) with two washers (4) and screws (5).
2.
Install elbows (3) and (7) on filter (6).
3.
Install fuel tube (2) on elbow (3) and fuel line (8) on elbow (7).
4.
Connect battery ground cable (WP 0126 00).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
1
3
8
4
5
6
7
END OF WORK PACKAGE
0375 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version