 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
FOR SPECIAL PURPOSE KITS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
EXHAUST TUBE REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Materials/Parts
Cotter pin (item 17, WP 0470 00)
All
Locknut (item 145, WP 0470 00)
Tools and Special Tools
Equipment Condition
General mechanic's tool kit
Parking brake set and wheels chocked
(item 116, WP 0469 00)
(TM 9-2320-361-10).
Battery ground cable disconnected
(WP 0126 00).
WARNING
Do not touch hot exhaust system components with bare hands.
Severe injury to personnel will result.
REMOVAL
1.
Remove cotter pin (2) and exhaust tube (7) from personnel heater elbow (1). Discard cotter pin (2).
2.
Remove two nuts (5), screws (3), clamps (4), and exhaust tube (7) from left front fender (6).
3.
Remove locknut (8), screw (10), clamp (9), and exhaust tube (7) from splash shield (11). Discard
locknut (8).
4.
Remove exhaust tube (7) from vehicle.
INSTALLATION
1.
Install exhaust tube (7) on personnel heater elbow (1) with new cotter pin (2) through elbow (1)
and tube (7).
2.
Install exhaust tube (7) on left front fender (6) with two clamps (4), screws (3), and nuts (5).
3.
Install exhaust tube (7) on splash shield (11) with clamp (9), screw (10), and new locknut (8).
4.
Connect battery ground cable (WP 0126 00).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
2
3
10
9
11
4
8
7
6
5
3
4
END OF WORK PACKAGE
0355 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version