 |
|||
|
|
|||
|
Page Title:
FUEL BURNING PERSONNEL HEATER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0351 00
FUEL BURNING PERSONNEL HEATER REPLACEMENT (Contd)
REMOVAL
1.
Disconnect wiring harness (1) from personnel heater (2).
2.
Remove fuel line (4) from elbow (3) and personnel heater (2).
3.
Remove elbow (3) from personnel heater (2).
4.
Remove cotter pin (9) and disconnect exhaust tube (10) from personnel heater (2). Discard cotter
pin (9).
5.
Remove four screws (6), lockwashers (7), and adapter (5) from personnel heater (2). Discard
lockwashers (7).
6.
Remove two clamps (8) and personnel heater (2) from mount (11).
INSTALLATION
1.
Install heater (2) on mount (11) with two clamps (8).
2.
Install adapter (5) on personnel heater (2) with four new lockwashers (7) and screws (6).
3.
Install elbow (3) on personnel heater (2).
4.
Install exhaust tube (10) on personnel heater (2) and insert new cotter pin (9) through tube (10)
and personnel heater (2).
5.
Install fuel line (4) on elbow (3).
6.
Connect wiring harness (1) to personnel heater (2).
7.
Connect battery ground cable (WP 0126 00).
8.
Start heater and check operation (TM 9-2320-361-10).
9.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
3
4
2
5
1
11
6
7
8
9
10
END OF WORK PACKAGE
0351 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version