 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
FRONT WINCH CABLE REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
References
All
WP 0020 00
Tools and Special Tools
Equipment Condition
General mechanic's tool kit
Parking brake set and wheels chocked
(item 116, WP 0469 00)
(TM 9-2320-361-10).
Front winch cable unwound
(TM 9-2320-361-10).
WARNING
Wear leather gloves when handling cable. Do not let cable run
through hands. Broken or rusty wires may cause injury to
personnel.
REMOVAL
1.
Loosen setscrew (2) and remove front winch cable (3) from drum (1).
2.
Remove nut (4) and screw (6) from clevis (7) and remove chain (5).
INSTALLATION
1.
Install chain (5) on clevis (7) with screw (6) and nut (4).
2.
Install front winch cable (3) in drum (1) and tighten setscrew (2).
3.
Wind front winch cable on front winch drum (TM 9-2320-361-10).
4.
Lubricate winch cable (WP 0020 00).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
1
3
7
6
4
5
END OF WORK PACKAGE
0343 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version