 |
|||
|
|
|||
|
Page Title:
ACCESS DOOR MOLDING AND ACCESS PLATE REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
ACCESS DOOR MOLDING AND ACCESS PLATE REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
M185A3, M109A3
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Materials/Parts
Battery ground cable disconnected
(WP 0126 00).
Three rivets (item 315, WP 0470 00)
Three plugs (item 310, WP 0470 00)
REMOVAL
1.
Remove four screws (1) and plate (2) from van wall (3).
2.
Drill three rivets (5) and plugs (6) out of molding (4) and van wall (3). Discard rivets (5) and plugs (6).
3.
Remove molding (4) from van wall (3).
INSTALLATION
1.
Install molding (4) on van wall (3) with three new rivets (5) and plugs (6).
2.
Install plate (2) on van wall (3) with four screws (1).
3.
Connect battery ground cable (WP 0126 00).
4.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
3
~
1
5
4
6
END OF WORK PACKAGE
0333 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version