 |
|||
|
|
|||
|
Page Title:
VAN BODIES FRONT SPLASH GUARD REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
VAN BODIES FRONT SPLASH GUARD REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
M185A3, M109A3
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Materials/Parts
Battery ground cable disconnected
(WP 0126 00).
Eight locknuts (item 129, WP 0470 00)
NOTE
Left and right front splash guards are removed the same, except
for two additional screws for the pioneer tool bracket on the left
side. This procedure is for the left front splash guard.
REMOVAL
1.
Remove two locknuts (6) and screws (3) from two braces (9) and frame (4). Discard locknuts (6).
2.
Remove two locknuts (11), screws (8), and two braces (9) from splash guard (10). Discard locknuts (11).
3.
Remove two locknuts (12) and screws (7) from pioneer tool bracket (13) and splash guard (10).
Discard locknuts (12).
4.
Remove two locknuts (1), screws (5), and splash guard (10) from frame (2). Discard locknuts (1).
INSTALLATION
1.
Install splash guard (10) on frame (2) with two screws (5) and new locknuts (1).
2.
Install pioneer tool bracket (13) on splash guard (10) with two screws (7) and new locknuts (12).
3.
Install two braces (9) on frame (4) with two screws (3) and new locknuts (6).
4.
Install two braces (9) on splash guard (10) with two screws (8) and new locknuts (11).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
3
1
4
5
9
6
7
12
11
8
9
13
10
END OF WORK PACKAGE
0329 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version