 |
|||
|
|
|||
|
Page Title:
WATER TANK DISCHARGE VALVE CONTROL LEVERS MAINTENANCE (M50A3) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0290 00
WATER TANK DISCHARGE VALVE CONTROL LEVERS MAINTENANCE (M50A3) (Contd)
INSTALLATION
1.
Install two cables (6) through adapters (5) and plate (7).
2.
Install discharge valve control assembly (3) under shelf (2) with six screws (1) and new locknuts (11).
3.
Install two adapters (5) to plate (7).
4.
Insert two screws (8) in two valve control levers (9) and install nuts (10). Do not tighten nuts (10).
5.
Thread cables (6) through holes in screws (8).
6.
Install two coupling nuts (4) on adapters (5).
7.
Remove slack in two cables (6) and tighten nuts (10).
ADJUSTMENT
NOTE
Hold end of cable securely before loosening nuts. Cable may be
under tension.
1.
Loosen two nuts (10).
2.
Remove slack in two cables (6) and tighten nuts (10).
3.
Connect battery ground cable (WP 0126 00).
4.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
2
3
11
4
5
6
10
7
9
8
END OF WORK PACKAGE
0290 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version