 |
|||
|
|
|||
|
Page Title:
WATER TANK DISCHARGE VALVE CONTROL LEVERS MAINTENANCE (M50A3) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0290 00
WATER TANK DISCHARGE VALVE CONTROL LEVERS MAINTENANCE (M50A3) (Contd)
CLEANING AND INSPECTION (Contd)
8.
Install new bushings (19) in bracket (20) with press until bushing (19) ends extend 0.5 in. (12.7 mm)
from bracket (20) sides.
9.
Inspect levers (5) and (25) for wear, latch, handle, or rod damage. Refer to table 1 for
measurements. Replace levers (5) and (25) if not within wear limits.
10.
Inspect lever shaft (21) for grooves or wear. Refer to table 1, for measurements. Replace lever
shaft (21) if not within wear limits.
11.
Inspect spacer bar (3) for cracks or damage. Replace spacer bar (3) if cracked or damaged.
LEVER ASSEMBLY
1.
Install lock release lever (11) and spring (10) on lever (5) with shoulder screw (13).
2.
Install connecting links (9) and (12) and straight pin (8) on lever (5).
3.
Install control handle (6) on lever (5) with straight pin (4) and cotter pin (7).
CONTROL LEVERS ASSEMBLY
1.
Place spacers (18) and (22) on exposed ends of bushings (17), (19), and (23).
2.
Install spacer bar (3) on brackets (16), (20), and (24) with three new lockwashers (2) and
screws (1). Do not tighten screws (1).
3.
Place lever shaft (21) through bracket (16), lever (5), bracket (20), lever (25), and bracket (24), and
install with three new lockwashers (15) and screws (14).
4.
Tighten three screws (1).
6
7
5
2
1
8
3
9
14
4
15
14
12
10
13
11
16
8
17
18
22
9
19
20
23
10
24
13
12
11
21
0290 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version