 |
|||
|
|
|||
|
Page Title:
WATER TANK NOZZLE HOLDER REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
WATER TANK NOZZLE HOLDER REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
M50A3
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Materials/Parts
Battery ground cable disconnected
(WP 0126 00).
Six locknuts (item 130, WP 0470 00)
REMOVAL
1.
Remove two locknuts (4), screws (2), and nozzle hanger (3) from tank body (1).
2.
Remove two locknuts (10), screws (13), and nozzle holder (12) from angle bracket (11). Discard
locknuts (10).
3.
Remove two locknuts (4), screws (9) and angle bracket (11) from tank body (1). Discard locknuts (4).
4.
Remove screw (7), washer (8) and strap (6) from tank body (1).
INSTALLATION
1.
Install strap (6) on tank body (1) with screw (7) and washer (8).
2.
Install angle bracket (11) on tank body (1) with two screws (9) and new locknuts (4).
3.
Install nozzle holder (12) on angle bracket (11) with two screws (13) and new locknuts (10).
4.
Install nozzle hanger (3) on tank body (1) with two screws (2) and new locknuts (4).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 92320-361-10).
2
4
3
1
5
13
12
8
11
6
10
7
9
END OF WORK PACKAGE
0270 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version