 |
|||
|
|
|||
|
Page Title:
FRONT SHACKLE (W/WINCH) REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
FRONT SHACKLE (W/WINCH) REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
All
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Materials/Parts
Battery ground cable disconnected
(WP 0126 00).
Two locknuts (item 136, WP 0470 00)
Two locknuts (item 147, WP 0470 00)
NOTE
Left shackle has two spacers and right shackle has only one.
This procedure covers the left shackle and bracket.
REMOVAL
1.
Remove retaining pin (6) from pin (5).
2.
Remove pin (5), and shackle (4) from bracket (3).
3.
Remove three locknuts (7), screws (2), and two spacers (9) from bracket (3) and bumper (8).
Discard locknuts (7).
4.
Remove locknut (10), screw (1), and bracket (3) from bumper (8). Discard locknut (10).
INSTALLATION
1.
Install bracket (3) on bumper (8) with screw (1) and new locknut (10).
2.
Install two spacers (9), three screws (2), and new locknuts (7) on bracket (3) and bumper (8).
3.
Install shackle (4) on bracket (3) with pin (5).
4.
Install retaining pin (6) on pin (5). Latch retaining pin (6).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
1
3
10
5
4
7
9
8
6
END OF WORK PACKAGE
0198 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version