 |
|||
|
|
|||
|
Page Title:
AIR SYSTEM SAFETY VALVE REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
AIR SYSTEM SAFETY VALVE REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
All
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Materials/Parts
Battery ground cable disconnected
Antiseize tape (item 42, WP 0468 00)
Air reservoirs drained (TM 9-2320-361-10).
REMOVAL
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
Remove air system safety valve (1) from tee fitting (2).
INSTALLATION
NOTE
All male pipe threads must be wrapped with antiseize tape
before installation.
1.
Install air system safety valve (1) in tee fitting (2).
2.
Connect battery ground cable (WP 0126 00).
3.
Start engine (TM 9-2320-361-10), build up air pressure in air reservoirs, and check for leaks.
4.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
2
END OF WORK PACKAGE
0177 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version