 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-361-24-1
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
LIGHT SWITCH REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
Parking brake set and wheels chocked
All
(TM 9-2320-361-10).
Battery ground cable disconnected
Parts/Materials
Three lockwashers (item 245, WP 0470 00)
REMOVAL
1.
Remove three screws (6), lockwashers (5), handles (4), and washers (3) from light switch (1).
Discard lockwashers (5).
2.
Remove four mounting screws (7) from instrument panel (2) and light switch (1). Push light switch
(1) through instrument panel (2).
3.
Disconnect front wiring harness connector (8) from light switch (1).
INSTALLATION
1.
Connect front wiring harness connector (8) to light switch (1).
2.
Position light switch (1) through instrument panel (2) and install with four mounting screws (7).
3.
Install three washers (3) and handles (4) on light switch (1).
4.
Install three new lockwashers (5) and screws (6) on light switch (1).
5.
Connect battery ground cable (WP 0126 00).
6.
Check lights for proper operation (TM 9-2320-361-10).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
6
4
2
5
1
3
7
8
END OF WORK PACKAGE
0101 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version