 |
|||
|
|
|||
|
Page Title:
SPEEDOMETER DRIVE SHAFT AND ADAPTER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0099 00
SPEEDOMETER DRIVE SHAFT AND ADAPTER REPLACEMENT (Contd)
SPEEDOMETER SHAFT REMOVAL
1.
Turn four lockstuds (4) 1/4 turn left and pull instrument cluster (5) away from instrument
panel (14).
2.
Remove speedometer drive shaft (2) from adapter (12).
3.
Remove two locknuts (7), clamps (6), screws (1), and speedometer drive shaft (2) from instrument
panel (14) and floor (13). Discard locknuts (7).
4.
Remove speedometer drive shaft (2) from speedometer (3).
SPEEDOMETER ADAPTER REMOVAL
1.
Remove adapter (12) from transfer case (11).
2.
Remove adapter shaft (10), sleeve (9), and drive shaft (8) from adapter (12).
3.
Remove fitting (15) from adapter (12).
SPEEDOMETER ADAPTER INSTALLATION
1.
Install fitting (15) and adapter (12).
2.
Install drive shaft (8), sleeve (9), and adapter shaft (10) on adapter (12).
3.
Install adapter (12) on transfer case (11).
SPEEDOMETER SHAFT INSTALLATION
1.
Install speedometer drive shaft (2) on speedometer (3).
2.
Install speedometer drive shaft (2) on instrument panel (14) and floor (13) with two clamps (6),
screws (1), and two new locknuts (7).
3.
Install speedometer drive shaft (2) on adapter (12).
4.
Position instrument cluster (5) on instrument panel (14) and lock in place by turning four
lockstuds (4) 1/4 turn to right.
5.
Install front and center cab tunnels (WP 0230 00).
6.
Install battery ground cable (WP 0126 00).
7.
Lubricate adapter (WP 0020 00).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0099 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version