|
|
TM 9-2320-361-24-1
0091 00
FRONT WIRING HARNESS REPLACEMENT (Contd)
INSTALLATION (Contd)
48.
Install plate (56) and spacer (55) on alternator (50) with two new lockwashers (57) and screws (58).
49.
Install wire (64) through spacer (55) and on alternator terminal (63) with new lockwasher (65) and
nut (66). Tighten nut (66) 4555 lb-in (56 Nm).
50.
Install wire (53) through spacer (55) and on alternator wire (54).
51.
Coat wire (64) and bottom of cover (69) with sealant.
52.
Install cover (69) on alternator (50) with two new lockwashers (70) and screws (61).
53.
Remove slack from front wiring harness (52).
54.
Install two wires (62) and (37) on brush guard support (35) with new tiedown strap (34).
55.
Install clamp (49) on front wiring harness (52) and cable bracket (46) with screw (48) and nut (51).
56.
Install clamp (40) on front wiring harness (52) and headlamp panel (37) with screw (39) and nut (41).
57.
Install clamp (59) on front wiring harness (52) and stud (30) with new lockwasher (68) and nut (67).
58.
Install clamp (45) on front wiring harness (52) and alternator support plate (43) with screw (44)
and nut (47).
34
35
36
32
33
37
30
31
~
38
~
39
61
70
60
~
59
69
68
58
40
37
67
57
41
66
65
64
62
56
63
55
54
50
49
42
43
53
51
44
46
48
45
52
47
0091 00-15
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |