 |
|||
|
|
|||
|
Page Title:
FRONT WIRING HARNESS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0091 00
FRONT WIRING HARNESS REPLACEMENT (Contd)
INSTALLATION (Contd)
NOTE
Steps 32 through 36 cover the left side front composite lights.
31.
Route wires (13), (14), and (19) through plate (15).
32.
Install grommet (16) in plate (15) and grommet (26) in fender (25).
33.
Connect wires (13), (14), and (19) to wires (12), (27), and (24).
34.
Install plate (15) on four screws (23) with four nuts (18).
35.
Install two clamps (20) on front wiring harness (17) and fender support (11) with two screws (21)
and nuts (22).
36.
Repeat steps 32 through 36 for right side front composite lights.
37.
Connect wire (9) to horn wire (10).
38.
Connect wire (8) to blackout lamp (28).
39.
Connect wires (3) and (5) to left headlamp (1).
40.
Remove slack from front wiring harness (17).
41.
Install clamp (6) on front wiring harness (17) and stud (29) with nut (7).
42.
Install wires (3), (5), and (8) on brush guard support (2) with new tiedown strap (4).
43.
Connect wires (62) to horn (42).
44.
Connect wires (37) to right headlamp (38).
45.
Repeat step 45 for left headlamp.
46.
Connect wire (60) to temperature sending unit (31).
47.
Connect wire (33) to preheater wire (32).
1
2
29
4
3
28
~
5
27
26
6
25
7
~
8
9
24
10
23
22
12
21
13
11
14
20
15
16
17
19
18
0091 00-14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version