 |
|||
|
|
|||
|
Page Title:
AIR CLEANER ASSEMBLY MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0053 00
AIR CLEANER ASSEMBLY MAINTENANCE (Contd)
REMOVAL
1.
Disconnect tube (2) from adapter (3), and remove adapter (3) from air cleaner head (4).
NOTE
Step 2 must be performed with two personnel.
2.
Remove four nuts (1), screws (6), lockwashers (5), and air cleaner head (4) from firewall (7).
Discard lockwashers (5).
INSPECTION
Inspect air cleaner head (4) for cracks or damage that would allow unfiltered air to enter. Replace air
cleaner head (4) if cracked or damaged.
INSTALLATION
NOTE
Step 1 must be performed with two personnel.
1.
Install air cleaner head (4) on firewall (7) with four screws (6), new lockwashers (5), and nuts (1).
NOTE
Male pipe threads must be wrapped with antiseize tape before
installation.
2.
Install adapter (3) on air cleaner head (4).
3.
Connect tube (2) to adapter (3).
4.
Install air cleaner element (WP 0052 00).
5.
Install air intake tube and cap (WP 0051 00).
6.
Connect battery ground cable (WP 0126 00).
7.
Lower and secure hood (TM 9-2320-361-10).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
2
3
4
7
5
6
END OF WORK PACKAGE
0053 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version