 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0049 00
CLUTCH RELEASE BEARING, SHAFT, AND FORK MAINTENANCE (Contd)
REMOVAL
1.
Remove two support springs (9) from clutch release bearing assembly (8) and clutch release
fork (7).
2.
Remove clutch release bearing assembly (8) from input shaft (10).
3.
Remove two screws (6), lockwashers (5), and thrust washers (4) from clutch release fork (7).
Discard lockwashers (5).
4.
Slide clutch release shaft (3) out of clutch release fork (7).
5.
Remove clutch release fork (7) and clutch release shaft (3) from transmission (1).
6.
Remove seal (2) from bell housing of transmission (1). Discard seal (2).
NOTE
Perform step 7 if bearing requires replacement.
7.
Remove grease fitting (13), two buttons (14), and bearing (12) from clutch release bearing
housing (11).
INSPECTION
1.
Inspect bearing (12) (TM 9-214). Replace bearing (12) if damaged.
2.
Visually inspect shaft (3) and clutch release fork (7) for wear or damage. Replace shaft (3) or
fork (7) if damaged.
INSTALLATION
NOTE
Perform step 1 if bearing was replaced.
1.
Install bearing (12), two buttons (14), and grease fitting (13) on clutch release bearing housing (11).
2.
Install new seal (2) on bell housing of transmission (1).
3.
Slide clutch release shaft (3) through transmission (1) and clutch release fork (7). Align holes in
fork (7) with slots in shaft (3).
4.
Install two thrust washers (4) on clutch release fork (7) with two new lockwashers (5) and
screws (6). Tighten screws (6) 4050 lb-ft (5468 Nm).
5.
Position clutch release bearing assembly (8) on input shaft (10) and clutch release fork (7).
6.
Install clutch release bearing assembly (8) on clutch release fork (7) with two support springs (9).
7.
Lubricate clutch release bearing (WP 0020 00).
8.
Lubricate clutch release shaft (WP 0020 00).
9.
Install transmission (WP 0132 00).
10.
Connect battery ground cable (WP 0126 00).
11.
Lower and secure hood (TM 9-2320-361-10).
12.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0049 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version