|
|
TM 9-2320-361-24-1
0024 00
ENGINE FRONT MOUNT PAD REPLACEMENT (Contd)
FRONT MOUNT PAD INSTALLATION
WARNING
Do not put fingers between frame and engine support. Jack
failure may result in injury to personnel.
1.
Install two lower front pads (24) and upper front pads (25) on front crossmember (6),
2.
Carefully lower engine and radiator (3) guiding two screws (8) through upper and lower front
pads (25) and (24) and front crossmember (6).
3.
Install fuel line (7) on front crossmember (6) with two clamps (5), screws (14), and nuts (4).
4.
Install ground strap (23) on front crossmember (6) with screw (17), washer (18), new
lockwasher (19), and nut (20).
5
Install two washers (15) and new locknuts (16) on screws (8). Tighten locknuts (16) 6570 lb-ft
(8895 Nm).
6.
Install two washers (10), springs (11), washers (12), and new locknuts (13) on studs (2). Do not
fully compress springs (11).
7.
Install front bumper (WP 0204 00).
8.
Install brush guard (WP 0203 00).
9.
Lower and secure hood (TM 9-2320-361-10).
10.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
11.
Connect battery ground cable (WP 0126 00).
3
1
2
4
22
5
21
25
24
6
23
8
7
15
9
16
14
10
11
18
17
20
12
19
13
END OF WORK PACKAGE
0024 00-3/4 blank
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |