Table 2. STE/ICE-R No-Go Chain Test - continued

TM 9-2320-361-24-1

0018 00

SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE--

REPROGRAMMABLE STE/ICE-R NO-GO CHAIN TROUBLESHOOTING (Contd)

Table 2. STE/ICE-R No-Go Chain Test (Contd).

STARTER CIRCUIT TESTS (Contd)

NG80

MODE

YES

Is GO still displayed?

Compare number to test

YES

limits as listed below.

Proceed to step 3.

STARTER CIRCUIT

Try to crank engine again.

VEHICLE

RESISTANCE (MILLIOHMS)

If GO is still displayed after

crank attempt, starter is not

M44A2

127

being energized.

M35A2

127

Proceed to step 4.

Is starter circuit resistance within

limits as listed above?

YES

Is resistance high?

Problem due to either weak

YES

Resistance is high

batteries or tight engine.

in starter circuit.

Proceed to step 4.

Resistance is low.

Look for short in starter circuit.

Go to battery tests, NG 81.

If short is not found, replace

starter motor (WP 0088 00).

NG81

NOTE

After repair, rerun GO Chain tests (WP 0017 00) to

verify that problem is fixed and no other problems exist.

0018 00-19