 |
|||
|
|
|||
|
Page Title:
Table 2. STE/ICE-R No-Go Chain Test - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0018 00
SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE--
REPROGRAMMABLE STE/ICE-R NO-GO CHAIN TROUBLESHOOTING (Contd)
Table 2. STE/ICE-R No-Go Chain Test (Contd).
CHARGING CIRCUIT TESTS (Contd)
NG50
TK
MODE
6
DO TEST PROBE CABLE OFFSET:
Dial 89 into TEST SELECT switches.
Press and hold TEST until CAL message
appears on display.
PROMPTING
MESSAGE
Release TEST.
Wait for offset value to appear on display.
TEST NO.
TEST
Is offset value within limits of 6.8 to +6.8?
89
045 VOLTS DC
YES
NO
STE/ICE-R is bad. Replace.
7
CHECK CHARGING SYSTEM OUTPUT VOLTAGE:
Connect red clip of cable W2 to output
terminal of alternator.
Connect black clip lead to ground.
Reconnect battery ground cable (WP 0126 00).
Start vehicle engine (TM 9-2320-361-10).
Turn on vehicle lights.
Set engine speed to fast idle (1200 RPM).
Press TEST
Is output voltage between
26.5 and 29.5 volts?
NO
YES
Proceed to step 8.
8
Proceed to next page.
0018 00-15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version