|
|
TM 9-2320-361-24-1
0018 00
SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE--
REPROGRAMMABLE STE/ICE-R NO-GO CHAIN TROUBLESHOOTING (Contd)
Table 2. STE/ICE-R No-Go Chain Test (Contd).
NG05
LOW OIL PRESSURE CHECK (Contd)
TK
MODE
2
CHECK OIL PRESSURE:
Dial 01 into TEST SELECT switches and press
TEST.
When PASS appears, dial 50 into TEST SELECT
switches and press TEST. VTM will now display
PROMPTING
RPM and oil pressure alternately.
MESSAGE
Start vehicle engine (TM 9-2320-361-10) and hold
RPM at speed indicated in table below.
Check the VTM display for correct oil pressure.
Is oil pressure within limits?
NOTE
After completing repair, rerun the GO Chain
tests (WP 0017 00) to verify that problem is
fixed and no other problem exists.
NORMAL OIL PRESSURE AND MAXIMUM RPM
5060 PSI @ 26002850 RPM
YES
NO
Stop engine immediately.
Refer to vehicle lubrication order (WP 0020 00)
to check oil type and replace oil filters.
If reading is still bad, refer to Mechanical
Systems Troubleshooting Index (WP 0007 00)
to diagnose engine.
Proceed to Gauge Test, NG 31.
NG31
0018 00-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |