Table 2. STE/ICE-R Go Chain Test - continued

TM 9-2320-361-24-1

0017 00

SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE--REPROGRAMMABLE

(STE/ICE-R) GO CHAIN TROUBLESHOOTING (Contd)

Table 2. STE/ICE-R Go Chain Test (Contd).

NOTE

Test GO1, VTM Connections and Checkout must be

performed before running any other STE/ICER test.

ENGINE WARMUP/COOLANT CHECK/OIL PRESSURE TEST

G06

MODE

CHECK FOR LEAKS AND COOLANT TEMPERATURE

Check vehicle for oil, fuel, and coolant leaks. Refer

to appropriate section to repair any leaks.

Warm up engine to normal operating

temperature. Read vehicle temperature gauge.

NORMAL COOLANT

VEHICLE

TEMPERATURE

M44A2

140200 F

M35A2

140200 F

Is temperature too high?

YES

Does temperature gauge read within the

limits after a normal warm up period?

Proceed to Gauge

Test, NG 31.

YES

NG31

(WP 0018 00)

Refer to Mechanical System

Troubleshooting Index

Proceed to step 2.

(WP 0005 00) to troubleshoot

engine cooling system for high

temperature. If no problems

are found, go to Test NG 31.

NG31

(WP 0018 00)

NOTE

After completing repair, return

to the GO-Chain tests to verify

that the problem is fixed and no