Table 2. STE/ICE-R Go Chain Test.

TM 9-2320-361-24-1

0017 00

SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE--REPROGRAMMABLE

(STE/ICE-R) GO CHAIN TROUBLESHOOTING (Contd)

Table 2. STE/ICE-R Go Chain Test.

BLACK (-)

NOTE

POWER

Test GO1, VTM Connections and Checkout, must be

CABLE W5

performed before running any other STE/ICE-R test.

RED (+)

VTM CONNECTIONS AND CHECKOUT

G01

MODE

PUSH ON

CAUTION

PULL OFF

Do not connect or disconnect VTM

while vehicle engine is running.

CAUTION

Connect P1 of power cable W5 to J1 on VTM

before connecting clip leads to battery.

CONNECT BATTERY POWER TO VTM

RED

RIGHT

➮

FRONT

PULL the power switch on VTM.

OF VEHICLE

Connect P1 of power cable W5 to J1 on

BLACK

VTM.

Connect black clip of cable W5 to

CABLE W6

negative terminal of vehicle battery.

M35A2, M44A2

Connect red clip of cable W5 to positive

terminal of vehicle battery.

Proceed to step 2

AFTER 2 SECONDS

POWER UP

PUSH ON the power switch on the VTM.

Verify that display indicates .8.8.8.8 for approximately 2

seconds and then changes to four dashes.

Does VTM switch display .8.8.8.8 and then change to four

dashes?