FUEL BURNING PERSONNEL HEATER REMOVAL, REPAIR, TEST, AND REPLACEMENT - continued

TM 9-2320-209-34-2-3

General Cleaning, Inspection, and Repair.

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

Eye shields must be worn when using compressed

air. Eye injury can occur if eye shields are not

used.

(1) Clean all parts with dry cleaning solvent. Dry with compressed air.

(2) Check that all parts are not damaged.

(3) If parts are damaged, throw parts away and get new ones.

Assembly.

FRAME 1

Put motor (1) in frame (2).

Put in four screws (3).

GO TO FRAME 2