FUEL BURNING PERSONNEL HEATER REMOVAL, REPAIR, TEST, AND REPLACEMENT - continued

TM 9-2320-209-34-2-3

FRAME 11

Take restriction electrical lead (1) out of clip (2).

Hold fuel outlet (3) of fuel control valve (4) over overflow container (5).

Make sure HI-LO switch (6) is in LO position. Flip control switch (7) to

RUN position. Fuel pump should be pumping.

Let fuel flow into overflow container

Flip HI-LO switch (6) to III position.

(5) for a few seconds.

Let fuel flow into graduate (8) for exactly one minute. Flip HI-LO switch.

(6) to LO position. Flip control switch (7) to OFF position.

Place graduate (8) on a level surface. Read level of fuel (9) as shown.

Level of fuel should be within limits given in table for type of fuel used.

Diesel Fuel

Fuel Type

Combat

Gasoline

DFA

DF2

DF1

7 to 9

6.5 to 8.5

6 to 8

6.5 to 8.5

Flow Rate

cc/min)

IF FUEL FLOW IS WITHIN GIVEN LIMITS, GO TO FRAME 12.

IF FUEL FLOW IS NOT WITHIN GIVEN LIMITS, GET NEW FUEL CONTROL VALVE.

END OF TASK

21-89