 |
|||
|
|
|||
|
Page Title:
FUEL BURNING PERSONNEL HEATER REMOVAL, REPAIR, TEST, AND REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
FRAME
3
Slide quartz rod (1) into tube (2) of flame detector switch (3). Place bow
1.
spring (4) on microswitch frame (5). Flip microswitch (6) down into place.
2.
Screw in adjusting screw and washer (7) and push up on bow spring (4)
while tightening adjusting screw.
Tighten screws (8) just enough so microswitch (6) is held in place.
3.
4.
Slowly unscrew adjusting screw (7) until microswitch (6) clicks. Slowly
screw in adjusting screw until microswitch clicks. Screw in adjusting screw
exactly three-quarters turn more.
Tighten screws (8).
5.
END OF TASK
21-78
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version