 |
|||
|
|
|||
|
Page Title:
Inspection and Repair - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
FRAME 4
1.
Put a coat of clean oil on bearings (1 through 7), Turn each bearing slowly
by hand. Each bearing must turn smoothly and freely without binding. If
bearings are damaged, get new ones.
2.
Check that ball bearings (1 through 6) and two roller bearings (7) have no
pitting, wear or any other damage. If bearings are worn or damaged, get
new ones.
3.
Check that bearing cages have no cracks or other damage. If bearing cages
are worn or damaged, get new bearings.
GO TO FRAME 5
18-248
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version