 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
Cleaning.
d.
Refer to Part 1, para 10-8.
(1) Clean bearings.
WARNING
Dry cleaning solvent is flammable. Do not use
near an open flame. Keep a fire extinguisher
nearby when solvent is used. Use only in well-
ventilated places. Failure to do this may result
in injury to personnel and damage to equipment.
(2) Clean all other parts in solvent.
FRAME 1
1.
Check that front end cover (1), pump body (2), and rear end cover (3) are
not cracked or broken, and that bores are not scored or worn.
2.
Check that two wear plates (4) have no nicks, burrs or deep scratches.
3.
Check that two gears (5) have no nicks, burrs, deep scratches or broken
teeth.
4.
Check that drive gearshaft (6) and driven gearshaft (7) are not cracked or
scored.
Check that four bearings (8) are not damaged. Refer to Part 1, para 10-8.
5.
6. Check that four pins (9) have no nicks, burrs, or deep scratches.
END OF TASK
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version