 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
WARNING
Dry cleaning solvent is flammable. Do not use
near an open flame. Keep a fire extinguisher
nearby when solvent is used. Use only in well-
ventilated places. Failure to do this may result
in injury to personnel. and damage to equipment.
Make sure grease and oil passages
d. Cleaning.
Clean all parts in solvent.
are open.
Inspection.
e.
FRAME 1
Check that tube assembly (1) is not cracked and does not have broken welds.
1.
Check that inner bore of tube assembly is not scratched or scored, and has
no badly worn surfaces.
2.
Check that oil passages in tube assembly (1) are not clogged or burred.
Check that screw threads are not burred, stripped or crossed.
Check that cylinder head (2) and gland (3) are not cracked or broken, and
3.
that bores are not burred.
Check that piston (4) and three piston rings (5) are not nicked, scratched or
4.
cracked, and that they do not have worn surfaces.
Check that piston rod (6) is not bent, nicked or scratched, and that it does
5.
not have burred, stripped or crossed threads.
Check that pin (7) is not chipped or scored, and that it has no flat spots.
6.
END OF TASK
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version