 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
h.
Testing.
FRAME 1
NOTE
Test rear winch mounted on the truck. Use winch control
lever on truck to mesh clutch when testing drum clutch
and brake. To turn on power to rear winch, refer to
operators manual, TM 9-2320-209-10/1.
WARNING
Always wear leather gloves when handling cable. Other-
wise, injury to hand could result.
Soldier A
Unwind 10 feet of cable (1), by hand.
1.
Turn on power to rear winch. Turn locking latch (2) to the unlocked
Soldier B
2.
position. Push control lever (3) forward. Put on locking latch.
While soldier B is unlocking latch (2), turn drum (4) by hand. The
Soldier A
3.
clutch must mesh.
4.
If clutch does not mesh properly, shut down power. Take out drum
and shaft assembly (4 and 5). Refer to para 18-5c, frames 11
through 14.
Make sure clutch and brake plate spring are put in correctly. Refer
5.
to para 18-5f, frames 13 through 15.
Assemble drum and shaft assembly (4 and 5). Refer to para 18-5f,
6.
frames 16 through 19.
Do steps 1 through 6 again.
7.
GO TO FRAME
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version