 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
FRAME 25
1.
Take off four capscrews (1) and washers (2) from bearing housing (3).
2.
Lift off bearing housing (3) with mating parts from worm housing (4).
3.
Take off gasket (5) from worm housing (4) and throw away gasket.
4.
Take off safety wire (6) from bearing retainer mounting screws (7).
5.
Take off capscrews (7) from retainer (8).
6.
Take apart bearing housing (3) from retainer (8).
7.
Check that roller bearing assembly (9) has no grooved, pitted or flattened
rollers. If roller bearing assembly is damaged, take out roller bearing
assembly (9) and oil seal (10). Refer to para 18-5e for inspection procedures.
8.
If oil seal (10) shows signs of leakage or is burned, take out oil seal. Be sure
not to damage bearing rollers. Refer to para 18-5e for inspection procedures.
GO TO FRAME 26
18-97
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version