|
|
TM 9-2320-209-34-2-2
c. Cleaning. There are no special cleaning procedures needed. Refer to
cleaning procedures given in Part 1, para 1-3.
d. Inspection and Repair.
1.
Check that body (1) is not bent, dented or cracked and that it has no broken
welds. Straighten bent or dented parts. Refer to FM 43-2. Weld tears or
cracks. Refer to TM 9-237.
2. Check that nuts (2) and bolts (3) are not cracked or damaged and that they
do not have any stripped threads. If parts are damaged, get new ones.
3. Check that two springs (4) and bracket (5) are not cracked, bent or damaged.
Straighten bent or dented parts. Refer to FM 43-2. Weld tears or cracks.
Refer to TM 9-237.
4. If more repair is needed, get new parts.
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |