|
|
TM 9-2320-209-34-2-2
h.
Test.
FRAME 1
Draw out and pull back outrigger leg (1) two times. Refer to
1.
TM 9-2320-209-10.
2.
Draw out outrigger leg (1).
3.
Note distance between point A and point B.
4.
Wait five minutes, then note distance between point A and point B. If
distance between point A and point B is less than distance noted in step 3,
do the following:
a. Remove outrigger leg. Refer to para 17-54.
Remove and disassemble outrigger leg hydraulic cylinder. Refer to
b.
c. Inspect and repair outrigger leg hydraulic cylinder. Refer to
d. Assemble and replace outrigger leg hydraulic cylinder. Refer to
e. Replace outrigger leg. Refer to para 17-54.
Do steps 1 through 4 again.
5.
6. Pull back outrigger leg.
Refer to TM 9-2320-209-10.
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |