|
|
TM 9-2320-209-34-2-2
d. Cleaning. There are no special cleaning procedures needed. Refer to
cleaning procedures given in Part 1, para 1-3.
NOTE
CIean all parts before inspection and before assembly.
e.
Inspection and Repair.
FRAME 1
1.
Check that upper leg (1), lower leg (2), shoe (3), pin (4), and latch (5)
have no cracks, bends or broken welds. Refer to TM 9-237 for welding
procedures.
2. Check that trunnion tube (6) and pin (7) are not worn or damaged. If parts
are damaged or worn, get new ones in their place.
3. Check that all nuts (8) and bolts (9) have no damaged threads or heads.
If parts are damaged or worn, get new ones in their place.
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |