|
|
TM 9-2320-209-34-2-2
f.
Assembly.
FRAME 1
Put key (1) in shaft (2).
1.
2.
Put on first reduction drive chain sprocket (3).
3.
Tighten setscrew (4) and put on safety wire (5).
4.
If sleeve bearing (6) was taken out, press sleeve bearing into second reduction
drive chain sprocket (7).
5.
Put key (8) into second reduction drive chain sprocket (7).
6.
Aline key (8) in second reduction drive chain sprocket (7) with keyway in first
reduction drive chain sprocket (3) and put sprocket (7) into sprocket (3) on
shaft (2).
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |