INTERMEDIATE CASE AND GEAR ASSEMBLY REMOVAL, REPAIR, REPLACEMENT AND ADJUSTMENT (TRUCK M764) - continued

TM 9-2320-209-34-2-2

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

Eye shields must be worn when using compressed

air. Eye injury can occur if eye shields are not

used.

Cleaning. Clean all parts with dry cleaning solvent. Dry with compressed

air.

Inspection.

FRAME 1

Check that access cover (1), cap (2), bearing retainer flange (3), and gear

housing (4) are not scratched, chipped, cracked or have small holes.

2. Check that feed gear and hub assembly (5) and first reduction gear (6) are

not burred, nicked, cracked or have damaged gear teeth.

3. Check that two pinion shafts (7) are not chipped, scratched, burred or

have damaged gear teeth.

4. Check five bearings (8). Refer to Part 1, para 10-8.

5. Check that all thread parts are not stripped or crossthreaded.

END OF TASK