WATER TANK NOZZLE ASSEMBLY REPAIR - continued

TM 9-2329-209-34-2-2

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

Cleaning.

(1) Clean all metal parts in dry cleaning solvent.

(2) Clean all other parts in soap and water and then rinse in clear water.

Inspection and Repair.

Check that packing nut (1) has no cracks or damaged threads. If damaged,

throw away and get a new one.

2. Check that packing retainer (2), spring (3), and plunger (4) are not

cracked or damaged. If parts are cracked or damaged, throw them away

and get new ones.

3. Check that nozzle body (5) and spout (6) have no cracks or damaged threads.

If they are damaged, throw them away and get new ones.

4. Check that nut (7), spring (8), push rod (9), and cylinder (10) are not

damaged. If they are damaged, get a new nozzle body (5).

END OF TASK