Inspection and Repair. - TM-9-2320-209-34-2-20169

TM 9-2320-209-34-2-2

c. Cleaning. There are no special cleaning procedures needed. Refer to

cleaning procedures given in Part 1, para 1-3.

Inspection and Repair.

FRAME 1

Check that body (1) is not bent, dented, cracked, and that it has no broken

welds. Straighten bent or dented parts. Refer to FM 43-2. Weld tears or

cracks. Refer to TM 9-237.

Check that nuts (2), bolts (3) and U-bolt (4) are not cracked or damaged

and that they do not have any stripped threads. If parts are damaged, get

new ones.

Check that two springs (5) and bracket (6) are not cracked, bent, or damaged

Straighten bent or dented parts. Refer to FM 43-2. Weld tears or cracks.

Refer to TM 9-237.

4. If more repair is needed, get new parts.

END OF TASK