|
|
TM 9-2320-209-34-2-2
c. Cleaning. There are no special cleaning procedures required. Refer to
cleaning procedures given in Part 1, para 13.
d.
Inspection and Repair.
FRAME 1
Check that frame (1) is not bent or cracked. Repair by welding. Refer to
1.
TM 9-237. If more repair is needed, get a new part.
2.
Check that adjusting handle (2) is not bent or cracked. If adjust handle is
damaged, get a new one.
3.
Check that spring (3) is not broken or weak.
If spring is damaged, get a new
one.
4.
Check that seat cushion (4) and backrest cushion (5) have no tears or worn
canvas. Repair damaged cushions. Refer to FM 43-3.
5. Working in cab, check that seat base (6) has no cracks or holes. Repair by
welding. Refer to TM 9-237.
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |