|
|
TM 9-2320-209-34-2-2
c. Cleaning. Clean allParts with stiff brush and soapy water.
d. Inspection. Check that all parts have no bends, dents, cracks, holes or
broken welds.
e. Repair.
Refer to FM 43-2.
(1) Straighten bent or dented parts.
(2) Weld cracks, holes or broken welds.
Refer to TM 9-237.
f.
Assembly.
FRAME 1
1.
Aline tool box (1) with support brackets (2). Put in 18 screws (3) and
nuts (4).
Put door catch (5) in place and aline screw holes. Put in machine screw (6)
2.
and nut (7).
Put door (8) in place and aline screw holes. Put in five machine screws (9)
3.
and nuts (10).
Put running board (11) in place and aline screw holes. Put in two screws
4.
(12) and nuts (13).
NOTE
Follow-on Maintenance Action Required:
Replace gasoline drum bracket (14). Refer to
TM 9-2320-209-20.
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |