Inspection and Repair. - TM-9-2320-209-34-2-20048

TM 9-2320-209-34-2-2

d. Cleaning. There are no special cleaning procedures needed. Refer to

cleaning procedures given in Part 1, para 1-3.

NOTE

Clean all parts before inspection and before assembly.

Inspection and Repair.

Check that cab body (1), instrument panel (2), glove compartment (3), grab

handle (4), plate (5), and vent door (6) have no cracks, dents, holes or torn

welds. Straighten dents. Refer to FM 43-2. Weld cracks, holes, and torn

welds. Refer to TM 9-237.

Check that vent screen (7), vent gasket (8), and hinge pin (9) have no breaks

or other damage. If parts are damaged, get new ones in their place.

GO TO FRAME 2